RS pro + Openwrt Wifi 5ghz
Inviato: 4 maggio 2011, 18:46
Salve a tutti vorrei sottoporvi il mio problema:
Sono giorni che cerco di configurare al meglio il wifi (Openwrt versione 10.03.1 rc4) ma non ci riesco.....Usando il codice regione US riesco ad usare la banda 2,4ghz a 27dbm mentre per quanto riguarda 5ghz solo i canali 36 40 44 48 a 17dbm che sono un po pochini. Ho provato praticamente con tutti i codici regionali e non riesco comunque a capire una cosa: usando il codice regionale BB ottengo:
root@OpenWrt:/mnt/downloads# iw reg get
country BB:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (3, 23)
(5250 - 5330 @ 40), (3, 23), DFS
(5735 - 5835 @ 40), (3, 30)
Quindi tecnicamente dovrei poter usare i canali 36 40 44 48 a 23dbm, ma ciò non avviene infatti usando iw list:
Frequencies:
* 5180 MHz [36] (17.0 dBm)
* 5200 MHz [40] (17.0 dBm)
* 5220 MHz [44] (17.0 dBm)
* 5240 MHz [48] (17.0 dBm)
* 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5500 MHz [100] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5520 MHz [104] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5540 MHz [108] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5560 MHz [112] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5580 MHz [116] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5680 MHz [136] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5700 MHz [140] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5745 MHz [149] (30.0 dBm)
* 5765 MHz [153] (30.0 dBm)
* 5785 MHz [157] (30.0 dBm)
* 5805 MHz [161] (30.0 dBm)
* 5825 MHz [165] (30.0 dBm)
I canali usabili non dfs 36 40 44 48 sono sempre a 17dbm. Perchè?
Ps. non uso dal 149 in su perchè i macbook pro in mio possesso non supportano quei canali.
Ho provato anche a compilare wireless-regdb 2010.11.24 sostituendo per IT il seguente:
country IT:
(2402 - 2482 @ 40), (N/A, 27)
(5170 - 5835 @ 40), (N/A, 30)
Una volta compilato ho sostituito regulatory.bin in /usr/lib/crda (Openwrt sempre versione 10.03.1 rc4)
Riavviato openwrt legge correttamente la modifica, infatti:
cfg80211: Calling CRDA for country: IT
cfg80211: Regulatory domain changed to country: IT
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2700 mBm)
(5170000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
ma usando iw list si nota che non è cambiato niente; la situazione è esattamente come sopra...
e se provo comunque a cambiare manualmente la txpower ottengo:
root@OpenWrt:~# iwconfig wlan0 txpower 23
Error for wireless request "Set Tx Power" (8B26) :
SET failed on device wlan0 ; Invalid argument.
Qualcuno è incappato già nel mio stesso problema?
Sono giorni che cerco di configurare al meglio il wifi (Openwrt versione 10.03.1 rc4) ma non ci riesco.....Usando il codice regione US riesco ad usare la banda 2,4ghz a 27dbm mentre per quanto riguarda 5ghz solo i canali 36 40 44 48 a 17dbm che sono un po pochini. Ho provato praticamente con tutti i codici regionali e non riesco comunque a capire una cosa: usando il codice regionale BB ottengo:
root@OpenWrt:/mnt/downloads# iw reg get
country BB:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (3, 23)
(5250 - 5330 @ 40), (3, 23), DFS
(5735 - 5835 @ 40), (3, 30)
Quindi tecnicamente dovrei poter usare i canali 36 40 44 48 a 23dbm, ma ciò non avviene infatti usando iw list:
Frequencies:
* 5180 MHz [36] (17.0 dBm)
* 5200 MHz [40] (17.0 dBm)
* 5220 MHz [44] (17.0 dBm)
* 5240 MHz [48] (17.0 dBm)
* 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5500 MHz [100] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5520 MHz [104] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5540 MHz [108] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5560 MHz [112] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5580 MHz [116] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5680 MHz [136] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5700 MHz [140] (20.0 dBm) (passive scanning, no IBSS, radar detection)
* 5745 MHz [149] (30.0 dBm)
* 5765 MHz [153] (30.0 dBm)
* 5785 MHz [157] (30.0 dBm)
* 5805 MHz [161] (30.0 dBm)
* 5825 MHz [165] (30.0 dBm)
I canali usabili non dfs 36 40 44 48 sono sempre a 17dbm. Perchè?
Ps. non uso dal 149 in su perchè i macbook pro in mio possesso non supportano quei canali.
Ho provato anche a compilare wireless-regdb 2010.11.24 sostituendo per IT il seguente:
country IT:
(2402 - 2482 @ 40), (N/A, 27)
(5170 - 5835 @ 40), (N/A, 30)
Una volta compilato ho sostituito regulatory.bin in /usr/lib/crda (Openwrt sempre versione 10.03.1 rc4)
Riavviato openwrt legge correttamente la modifica, infatti:
cfg80211: Calling CRDA for country: IT
cfg80211: Regulatory domain changed to country: IT
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2700 mBm)
(5170000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
ma usando iw list si nota che non è cambiato niente; la situazione è esattamente come sopra...
e se provo comunque a cambiare manualmente la txpower ottengo:
root@OpenWrt:~# iwconfig wlan0 txpower 23
Error for wireless request "Set Tx Power" (8B26) :
SET failed on device wlan0 ; Invalid argument.
Qualcuno è incappato già nel mio stesso problema?